Model No.: KCB
Warranty: One Year
Matreial: Cast Iron, Stainless Steel
Temperature: -20-200 Degree
Packaging: wooden package
Productivity: 1000 pcs/month
Place of Origin: China
Supply Ability: 1000 pcs/month
HS Code: 8413602190
The usage and maintenance
1. Start up preparation:
(1) Take off the sundry from the machine before starting and clean up.
(2) Bearing in vivo perfusion clean hot oil as lubricant , open A, B two holes, by injection from A hole, until B hole has the oil spill, rotate coupling with the hand, there would be no gas from two holes, and restore the two holes to tighten bolts.
(3) Check each part of the pump, motor, pipes and other junction, should not have loose phenomenon.
(4) Turn the coupling with the hand can light turning, and observe the pump with and without friction, shall be immediately ruled out.
(5) Before driving to pump transmission medium, in the process of filling, slowly turns the coupling with the hand, should avoid up into the air.
(6) Transferring hot oil, while driving to uniform preheating. Preheating is to use the heating medium is to be delivered through the pump body.
Preheat standard: the oil temperature is not higher than 40 ℃, temperature < - 50 ℃ / hour, preheating, loosen bolts should be solid pump 0.3 0.5 mother, after the preheating to tighten it.
(7) Preheating process, should observe the running situation, once found running unhealthy phenomenon, should immediately stop the pump to check.
The KCB crude oil Gear Pump is equipped with a protection valve as an overload protection. The full return pressure of the protection valve is 1.5 times the rated pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this protection valve can not be used for long-term work of the pressure reducing valve. It can be installed separately on the pipeline when needed. Seen from the overhanging end of the spindle to the pump, it rotates clockwise. Flow rate: 1.1m3/h-600m3/h Pressure: 0.28MPa--2.5MP. KCB gear pump is mainly used for oil flow and oil discharge in oil fields, oil depots, ports, docks, ships, etc.
Molde Capacity(L/MIN) Pressure(Mpa) Diameter(mm) Motor power(KW) KCB18.3 18.3 1.45 20 1.5 KCB33.3 33.3 1.45 20 2.2 KCB55 55 0.33 25 1.5 KCB83.3 83.3 0.33 40 2.2 KCB135 135 0.33 50 2.2 KCB200 200 0.33 50 4 KCB300 300 0.36 70 5.5 KCB483.3 483.3 0.36 70 7.5 KCB633 633 0.28 100 11 KCB960 960 0.28 100 18.5 KCB1200 1200 0.6 150 37 KCB1600 1600 0.6 150 45 KCB1800 1800 0.6 200 55 KCB2500 2500 0.6 200 75 KCB2850 2850 0.6 250 90 KCB3800 3800 0.6 250 110 KCB5400 5400 0.6 250 160 KCB7600 7600 0.6 350 160 KCB9600 9600 0.6 350 185
KCB18.3-KCB83.3 model Crude oil pump:
KCB135-KCB960 model crude Oil Pump:
KCB200-KCB9600 model crude oil pump:
Botou Honghai Pump Co., LTD. Is a professional manufacturer specializing in developing and manufacturing various high viscosity pump , heat insulation pump , Screw Pump , asphalt pump , gear pump , stainless steel pump , high temperature pump , Rotor Pump , Hose Pump , and Centrifugal Pump .
Products are widely used in the national petroleum, chemical, shipping, electricity and other fields.
Our company has a perfect production system and quality assurance system, won the trust of domestic and foreign customers.
Copyright © 2021 Botou Honghai Pump Co.,Ltd All rights reserved.