Botou Honghai Pump Co.,Ltd
Water Discharge Pump,Big Flow Water Discharge Pump,Water Jet Discharge Pump
Botou Honghai Pump Co.,Ltd
Water Discharge Pump,Big Flow Water Discharge Pump,Water Jet Discharge Pump
Chemical pumpModel No.: IS
Impeller Number: Single-Stage Pump
Working Pressure: Low Pressure Pump
Influent Type of Impeller: Single Suction Pump
Position of Pump Shaft: Horizontal Pump
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Warranty: One Year
Voltage: 220/380v
Material: Cast Iron And Stainless Steel
Temperature: -20-90 Degree
Drive Type: Electric Motor And Diesel Engine
Pump Type: Single Stage Centrifugal Water Pump
Packaging: wooden package
Productivity: 800 pcs/month
Brand: Honghai
Transportation: Ocean,Land,Air,express
Place of Origin: China
Supply Ability: 800 pcs/month
Certificate: ISO9001:2008
HS Code: 8413709990
Port: Beijing Airport,Tianjin,Shanghai
The usage and maintenance for Water Pump
Start up preparation:
(1) Take off the sundry from the machine before starting and clean up.
(2) Bearing in vivo perfusion clean hot oil as lubricant , open A, B two holes, by injection from A hole, until B hole has the oil spill, rotate coupling with the hand, there would be no gas from two holes, and restore the two holes to tighten bolts.
(3) Check each part of the pump, motor, pipes and other junction, should not have loose phenomenon.
(4) Turn the coupling with the hand can light turning, and observe the pump with and without friction, shall be immediately ruled out.
(5) Before driving to pump transmission medium, in the process of filling, slowly turns the coupling with the hand, should avoid up into the air.
(6) Transferring hot oil(water), while driving to uniform preheating. Preheating is to use the heating medium is to be delivered through the pump body.
Preheat standard: the oil(water) temperature is not higher than 40 ℃, temperature < - 50 ℃ / hour, preheating, loosen bolts should be solid pump 0.3 0.5 mother, after the preheating to tighten it.
(7) Preheating process, should observe the running situation, once found running unhealthy phenomenon, should immediately stop the pump to check.
Pump's specification:
Model Capacity(m3/h) Head(m) Motor(KW) 50-32-125 12.5 20 2.2 50-32-160 12.5 32 3 50-32-200 12.5 50 5.5 50-32-250 12.5 80 11 65-50-125 25 20 3 65-50-160 25 32 5.5 65-50-200 25 50 7.5 65-50-250 25 80 15 65-50-315 25 125 30 80-65-125 50 20 5.5 80-65-160 50 32 7.5 80-50-200 50 50 15 80-50-250 50 80 22 80-50-315 50 125 37 100-80-125 100 20 11 100-80-160 100 32 15 100-80-200 100 50 22 100-80-250 100 80 37 100-80-315 100 125 75 125-80-200 160 50 37 125-80-250 160 80 55 125-80-315 160 125 125 125-80-400 80 50 50 125-100-250 200 80 80 125-100-315 200 125 125 125-100-400 100 50 50 150-125-250 200 20 20 150-125-315 200 32 32 150-125-400 200 50 50 200-150-250 400 22 22 200-150-315 400 32 32 200-150-400 400 50 50
IS series electric centrifugal water pumps for industrial and agricultural and urban, drainage, fire water supply and so on. It is used to suck water and physicochemical properties similar to water without solid particles. It is widely used in industrial and agricultural and urban, drainage, fire water supply and so on. The Centrifugal Pump has the advantages of simple structure, reliable performance, small volume, light weight, good anti-cavitation performance, low power consumption and convenient use and maintenance. The pump speed is divided into 2900 and 1450 rev / min. The performance is as follows: 2900 rev / min 1450 rev / min, Maximum flow: 240 m 3 / min 400 m 3 / min. Maximum total head: 125 meters 55 meters, Maximum speed: 3500 rpm (the impeller diameter is reduced when used for 60-wave power supply), Maximum working temperature: 80 ° C, The suction line pressure is allowed to be 0.3 MPa, and the maximum operating pressure of the pump is 1.6 MPa.
Pump's pictures:
Botou Honghai Pump Co., LTD. Is a professional manufacturer specializing in developing and manufacturing various high viscosity pump , heat insulation pump , Screw Pump , asphalt pump , Gear Pump , stainless steel pump , high temperature pump , Rotor Pump , Hose Pump , and centrifugal pump.
Products are widely used in the national petroleum, chemical, shipping, electricity and other fields.
Our company has a perfect production system and quality assurance system, won the trust of domestic and foreign customers.
Contact US
Product Categories : Centrifugal Pump > Centrifugal Water Pump
